Show simple item record

dc.contributor.authorKrautmann, R.
dc.contributor.authorSpalatu, N.
dc.contributor.authorJosepson, R.
dc.contributor.authorNedzinskas, R.
dc.contributor.authorKondrotas, R.
dc.contributor.authorGrzibovskis, Raitis
dc.contributor.authorVembris, Aivars
dc.contributor.authorKrunks, M.
dc.contributor.authorOja Acik, I.
dc.date.accessioned2023-10-16T12:43:56Z
dc.date.available2023-10-16T12:43:56Z
dc.date.issued2023
dc.identifier.issn0927-0248
dc.identifier.urihttps://www.sciencedirect.com/science/article/pii/S0927024822005566
dc.identifier.urihttps://dspace.lu.lv/dspace/handle/7/64856
dc.descriptionThis study was funded by the Estonian Research Council project PRG627 “Antimony chalcogenide thin films for next-generation semi-transparent solar cells applicable in electricity producing windows”, the Estonian Research Council project PSG689 “Bismuth Chalcogenide Thin-Film Disruptive Green Solar Technology for Next Generation Photovoltaics”, the Estonian Centre of Excellence project TK141 (TAR16016EK) “Advanced materials and high-technology devices for energy recuperation systems”, and the European Union's Horizon 2020 ERA Chair project 5GSOLAR (grant agreement No. 952509). The article is based upon work from COST Action Research and International Networking project "Emerging Inorganic Chalcogenides for Photovoltaics (RENEW-PV)," CA21148, supported by COST (European Cooperation in Science and Technology); Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD 01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2.en_US
dc.description.abstractAntimony trisulfide (Sb2S3) is a promising photovoltaic absorber, which has so far been fabricated mainly by chemical deposition methods. Despite its aptness for congruent sublimation, less research efforts have been made on low-temperature Sb2S3 processing by physical methods. In this regard, recent studies show large variation in the processing temperature of Sb2S3 films, which overall brings into question the need for higher substrate temperatures (>350 °C). Furthermore, in-depth analysis of defect structure of Sb2S3 employing temperature-dependent admittance spectroscopy (TAS) and photoluminescence (PL) remains largely unexplored. In this work, we systematically study the effect of close-spaced sublimation (CSS) substrate temperature on Sb2S3 absorber growth, employing a wide temperature range of 240–400 °C. Temperatures above 320 °C caused cracking phenomena in the Sb2S3 absorber film, proving the unviability of higher processing temperatures. CSS processing temperature of 300 °C was found optimal, producing crack-free Sb2S3 films with increased presence of (hk1) planes, and achieving the best CdS/Sb2S3 device with photoconversion efficiency of 3.8%. TAS study revealed two deep defects with activation energies of 0.32 eV and 0.37 eV. Low-temperature PL measurement revealed a band-to-band emission at 1.72 eV and a broad band peaked at 1.40 eV, which was assigned to a donor-acceptor pair recombination. Temperature-dependent I-V analysis showed that recombination at CdS–Sb2S3 interface remains a large limitation for the device efficiency. --//-- R. Krautmann, N. Spalatu, R. Josepson, R. Nedzinskas, R. Kondrotas, R. Gržibovskis, A. Vembris, M. Krunks, I. Oja Acik, Low processing temperatures explored in Sb2S3 solar cells by close-spaced sublimation and analysis of bulk and interface related defects, Solar Energy Materials and Solar Cells, Volume 251, 2023, 112139, ISSN 0927-0248, https://doi.org/10.1016/j.solmat.2022.112139. (https://www.sciencedirect.com/science/article/pii/S0927024822005566) Published under the CC BY licence.en_US
dc.description.sponsorshipEstonian Research Council project PRG627; Estonian Research Council project PSG689; Estonian Centre of Excellence project TK141 (TAR16016EK); European Union's Horizon 2020 ERA Chair project 5GSOLAR (grant agreement No. 952509; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD 01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART2.en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.relationinfo:eu-repo/grantAgreement/EC/H2020/739508/EU/Centre of Advanced Material Research and Technology Transfer/CAMART²en_US
dc.relation.ispartofseriesSolar Energy Materials and Solar Cells;25; 112139
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAntimony sulfideen_US
dc.subjectClose-spaced sublimationen_US
dc.subjectDeep defectsen_US
dc.subjectAdmittance spectroscopyen_US
dc.subjectPhotoluminescenceen_US
dc.titleLow processing temperatures explored in Sb2S3 solar cells by close-spaced sublimation and analysis of bulk and interface related defectsen_US
dc.typeinfo:eu-repo/semantics/articleen_US
dc.identifier.doi10.1016/j.solmat.2022.112139


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record