dc.contributor.author | Andzane, J. | |
dc.contributor.author | Felsharuk, A. | |
dc.contributor.author | Sarakovskis, Anatolijs | |
dc.contributor.author | Malinovskis, U. | |
dc.contributor.author | Kauranens, E. | |
dc.contributor.author | Bechelany, M. | |
dc.contributor.author | Niherysh, K.A. | |
dc.contributor.author | Komissarov, I.V. | |
dc.contributor.author | Erts, D. | |
dc.date.accessioned | 2021-01-05T06:35:19Z | |
dc.date.available | 2021-01-05T06:35:19Z | |
dc.date.issued | 2021 | |
dc.identifier.issn | 2468-6069 | |
dc.identifier.uri | https://dspace.lu.lv/dspace/handle/7/53308 | |
dc.description | This work was supported by the European Regional Development Fund (ERDF) project No 1.1.1.1/16/A/257. J. A. acknowledges
the ERDF project No. 1.1.1.2/1/16/037. Institute of Solid State Physics, University of Latvia, Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017 TeamingPhase2 under grant agreement No. 739508, project CAMART2
.
The raw/processed data required to reproduce these findings cannot be shared at this time as the data also form a part of an
ongoing study. | en_US |
dc.description.abstract | In this work, a simple cost-effective physical vapor deposition method for obtaining high-quality Bi2Se3 and Sb2Te3 ultrathin films with thicknesses down to 5 nm on mica, fused quartz, and monolayer graphene substrates is reported. Physical vapor deposition of continuous Sb2Te3 ultrathin films with thicknesses 10 nm and below is demonstrated for the first time. Studies of thermoelectrical properties of synthesized Bi2Se3 ultrathin films deposited on mica indicated opening of a hybridization gap in Bi2Se3 ultrathin films with thicknesses below 6 nm. Both Bi2Se3 and Sb2Te3 ultrathin films showed the Seebeck coefficient and thermoelectrical power factors comparable with the parameters obtained for the high-quality thin films grown by the molecular beam epitaxy method. Performance of the best Bi2Se3 and Sb2Te3 ultrathin films is tested in the two-leg prototype of a thermoelectric generator. | en_US |
dc.description.sponsorship | ERDF project No 1.1.1.1/16/A/257; ERDF project No. 1.1.1.2/1/16/037; Institute of Solid State Physics, University of Latvia, Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017 TeamingPhase2 under grant agreement No. 739508, project CAMART2 | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Elsevier B.V. | en_US |
dc.relation | info:eu-repo/grantAgreement/EC/H2020/739508/EU/Centre of Advanced Material Research and Technology Transfer/CAMART² | en_US |
dc.relation.ispartofseries | Materials Today Energy;19, 100587 | |
dc.rights | info:eu-repo/semantics/openAccess | en_US |
dc.subject | Research Subject Categories::NATURAL SCIENCES:Physics | en_US |
dc.subject | Ultrathin film | en_US |
dc.subject | Narrow band gap layered semiconductor | en_US |
dc.subject | Bismuth chalcogenide | en_US |
dc.subject | Antimony telluride | en_US |
dc.subject | Thickness-dependent thermoelectric properties | en_US |
dc.title | Thickness-dependent properties of ultrathin bismuth and antimony chalcogenide films formed by physical vapor deposition and their application in thermoelectric generators | en_US |
dc.type | info:eu-repo/semantics/article | en_US |
dc.identifier.doi | 10.1016/j.mtener.2020.100587 | |