FIBRE OPTICAL COUPLER SIMULATION BY COMSOL MULTIPHYSICS SOFTWARE

Abstract

The paper presents a simulation model developed for a special optical coupler intended for coupling radiation from signal and pump sources used for the realization of cladding-pumped doped fibre amplifiers. The model is developed in COMSOL Multiphysics and used to assess the pumping efficiency for different side pumping angles and different numbers of electromagnetic modes. The obtained results show that the highest pumping efficiency, above 75 %, is achieved for 5–14 modes when two fibres representing the pump source and the signal source form a 10-degree angle between their central axes. The search for the optimal number of modes corresponds to the development trend in optical coupler technology where the multimode pumping by light-emitting diode (LED) replaces the classical scheme with a single-mode pumping by a laser diode (LD). © 2022 Sciendo. All rights reserved. --//-- This is an open access article Elsts E., Supe A., Spolitis S., Zakis K., Olonkins S., Udalcovs A., Murnieks R., Senkans U., Prigunovs D., Gegere L., Draguns K., Lukosevics I., Ozolins O., Grube J., Bobrovs V. FIBRE OPTICAL COUPLER SIMULATION BY COMSOL MULTIPHYSICS SOFTWARE (2022) Latvian Journal of Physics and Technical Sciences, 59 (5), pp. 3 - 14, DOI: 10.2478/lpts-2022-0036 published under the CC BY-NC-ND 4.0 licence.